|
|
|
We are member of the EUROPEAN LOCKMASTER GROUP

|
| Mercedes BENZ key programming device & software NEW DEVICE |
 The new Mercedes Benz Key Programming Device for the models ML from 1998 to 2005 with the metal key(not the plastic electronic key) can now program all 8 keys in the Immobilizer. The Device program/add new keys without erasing the existing keys. You can program/add up to 8 new keys. The programming is done via the diagnostic plug OBD II. For programming you must use our special transponder, specially made for the key programming and to choose on which position you want to program the new key or keys with the help of the DIP switches built into the device . The programming is done for 8-10 seconds. With the device you can also program original keys ordered from the dealer.
More info>>>
 Buy now 600 EUR
|
|
|
 |
UNIVERSAL MERCEDES BENZ TRANSPONDER FOR KEY PROGRAMMING for E, C and G KLASS
 Buy now 35 EUR
Buy 5 chips for 150 EUR Buy 10 chips for 300 EUR
The transponder is ready to program direct on the Mercedes C, E and G KLASS models from 1996 to 1999 year for all key positions/number from 1 to 8. This transponder is for the models that use the metal or remote flip key with transponder inside. It is not working on models with electronic plastic key. The only thing you have to do is to insert the key into the ignition and turn it on then the transponder will program itself direct and you can start the car. |
|
MERCEDES Benz Commander Software 4.1
 
Main page

Special functions 
More info>>>
Features:
ABRITES Mercedes Commander is a professional software for diagnostic of Mercedes-Benz vehicles. It allows you to perform complete diagnostics of all 1995-present Mercedes-Benz models. It provides some unique functions, which are not supported by any other diagnostic tool.
Diagnostics is performed via the OBD-II connector or via Mercedes-Benz proprietary 38-pin connector (only older cars, pre-2001). Our PC USB diagnostic interface supports over 26 multiplexed K-Lines and Mercedes-Benz diagnostics CAN-BUS interface (also known as CAN-D).
Standard diagnostic functions:
- Read identification
- Read extended identification
- Read/Clear fault codes
- Device scan
- Display of Actual Values
- Actuator Tests
- Reset of control unit
- Control unit adaptations
- Adjustment of injector quantities of the fuel injection for Diesel Engines (CDI-4, CDI-5)
Special functions:
- Via OBDII - Odometer correction for W221 and W216 vehicles. The odometer is changed in the following units: CGW, EZS, Instrument Cluster and all other units, which store the odometer (like Tire Pressure Monitor and Adaptive Brake, for example) , Read/Write service history records in ZGW of W221 S-Class and W216 CL, Read/Write complete EEPROM and Flash of CGW (Central gateway) of W221 S-Class and W216 CL, Odometer correction in dashboard for Vito, Viano, Sprinter after 2006 year
- Instrument cluster/odometer correction (K-Line and C-Class (W203) via CAN)
- Instrument cluster - Read/Write EEPROM (K-Line and C-Class (W203 via CAN)
- Airbag - read/write EEPROM, clear crash data
- Dump Tool - calculate odometer values, reset odometer values, clear airbag crash data, make engine control virgin and so on
- ECU - Read/Write Flash, Read/Write EEPROM of Engine Control Units
- Immobilizer - Key Learning for Mercedes W163; Read/Write EEPROM of AAM/EAM control modules; Learn radio code of transmitter keys; Deactivate/Reactivate keys
- Key Programming - program transponders with the help of TAG programmer
- TV/AUX activation/deactivation
- Seatbelt warning activation/deactivation
- Reverse warning activation/deactivation
- Activation/deactivation of Speed warning for Gulf States
- Electrical Steering Lock (ESL) - Read/Write/Erase EEPROM by direct connection to the ESL module
- Electrical Ignition Switch (EIS, K-Line) - Read/Write EEPROM of EIS and ESL modules by diagnostic connection to the EIS module; Open/Close ESL
- Electrical Steering Lock (ESL, CAN) - Disable/Enable keys; Write VIN of new units; Activate/Deactivate ESL; Activate/Deactivate EZS
- Change ASSYST PLUS Service maintenance records
- Read/Write complete EEPROM of Central Gateway (CGW) via OBD II !!! NEW!!!
- Odometer correction in Instrument Cluster in SMART after 2007 year !!! NEW !!!
- Via OBDII - Mileage recalibration in Instrument Cluster for Mercedes VITO-MM W638, E-Class W211, CLS W219, GL X164, ML W164, R-Class W251, C-Class W203 and G-Class W463
- Via OBDII - Read/Program of the EEPROM from Instrument Cluster for Mercedes VITO W638, E-Class W211, CLS W219, GL X164, ML W164, R-Class W251, C-Class W203 and G-Class W463
- Via OBDII - Ability to suppress mileage synchronization between EZS and Instrument Cluster for Mercedes E-Class W211, CLS W219, GL X164, ML W164, R-Class W251
- Advanced Read/Change Service History Records in W168 A-Class dashboards
- Erase saved odometer by OBDII in "Electric Seat Adjustment Driver" and "Electric Seat Adjustment Front Passenger" control units, which are available in W164, W211, W219, W251, W221, W216 vehicles
- Read/Write EEPROM by OBDII of "Overhead Control Panel" control unit in vehicles W164, W211, W219, W251
- Read/Write EEPROM by OBDII of "Left Front Reversible Emergency Tensioning Retractor" control unit in vehicles W164, W211, W219, W251
- Read/Write EEPROM by OBDII of "Right Front Reversible Emergency Tensioning Retractor" control unit in vehicles W164, W211, W219, W251
- Improved scanning of devices - now the scanning of devices and the clearing of faults codes is very fast
- Adaptations for Instrument Cluster in W211 vehicles
- UNLOCK Control modules - ESP, Sprintshift transmission module in SMART 451, 452, 454
- Odometer correction for W203 after 2004. Possibility to block synchronization with EZS
- Erase Operating hours in Airbag control units by CAN (all Bosch and Temic airbags)
- !!! NEW !!! - Read/Write EEPROM of EDG Bosch engine control module by OBDII
- Read/Write Flash of EDG Bosch engine control module by OBDII
- Renew EDG engine control module (used in Smart vehicles) by OBDII
- Softouch Enable/Disable by OBDII for all SMART 450 vehicles. No TAN codes required!
- Air Conditioning Enable/Disable by OBDII for all SMART 450 vehicles. No TAN codes required!
- Read EEPROM of MEG control units for all SMART 450 vehicles by OBDII
- Adaptations for SMART 450: Outside temperature display (Celsius or Fahrenheit), Mileage Display (Km or Miles) and Tachometer (Enable or Disable)
Advanced functions:
- Custom memory read/write
- Custom requests
Note: Depending on the version that you have purchased some of these functions may not be available in your software.
|
 (incl. VAT)
Abrites Vehicle Diangostic Interface(AVDI) - MN001 - 796 EUR Buy now 796 EUR
- AVDI must be always purchased before you add any special function
AVDI includes diagnostic functionalities for VAG + Special functions AN008+AN011+AN015, BMW, Porsche, Opel, Toyota, Mercedes, Renault *
* in next versions will be added also Fiat, Alfa, lancia, Nissan, Mitsubishi, Honda, Ford, Peugeot, Citroen, Rover, Mazda
Note: (you must always buy the AVDI module before you chose any Special function)
Special functions for MERCEDES BENZ Commander:
AIRBAG - MN003 - 100 EUR Buy now 100 EUR
- EEPROM read/write, clear crash data
TV Activation - MN004 - 200 EUR Buy now 200 EUR
- activating the TV function while driving
Key Learning - MN005 - 300 EUR Buy now 300 EUR
- programming keys for Mercedes ML cars, read/write EIS
ECU - MN006 - 200 EUR Buy now 200 EUR
- read/write on some models the flash and eeprom memory
Key Learning SMART vehicles - MN008 - 360 EUR
- For all models SMART - Smart City, Smart Crossblade, Smart Roadster, Smart Fortwo, Smart Forfour - from 1998 up to
nowadays can be Programmed key by OBDII!
Buy now 360 EUR
Odometer correction for SMART vehicles - MN009 - 200 EUR
- Odometer correction in Instrument Cluster of SMART cars
after 2007 year
Buy now 200 EUR
Odometer correction - MN011 - 1656 EUR Buy now 1656 EUR -Odometer correction via OBD II
MB Commander FULL package - 3800 EUR Buy now 3800 EUR
- Full package include AVDI hardware
ZN002 NEC programmer - for MB IR keys - 240 EUR
Buy now 240 EUR
MB Commander FULL package with NEC IR Programmer - 4040 EUR
- Full package include AVDI hardware and NEC Programmer
Buy now 4040 EUR
|
Mercedes Benz Smart Key Programming Device
 
This programmer is specially made for the programming, reprogramming and repairing of the Mercedes Benz smart keys for the models produced between years 1998 - 2006. In order to program MB smart key, you have to reset the key, take out the Electronic Ignition Switch(EIS), Electronic steering lock(ESL) and the Engine ECU and then program them all together with the help of the special software that comes with the programmer. In order to read the eeprom dumps from the EIS, ESL and Engine ECU you will need the special programmers like OMEGA/ORANGE eeprom programmer and the
Motorola/Freescale MC912-9S12-9S12(Xgate) in-circuit Programmer. You will also need the original MB STAR Diagnose tester in order to code the the Engine ECU after resetting it and program the Drive authorization of the car in order to start and run the car.
For customers who wants to visit our company and see how it works, we do a special course for the MB Smart Key Programmer! Send an e-mail for the course price! |
 Buy now 4000 EUR
|
|
|